Nov 19, 2026 09:20 1 reads

Coated PVC Fabric from China: Why the Gram Weight on the Quote Is Half a Number

When a supplier quotes a PVC-coated fabric, he almost never gives you the finished fabric weight. Usually he quotes the raw material he cut from stock, which may refer to the base cloth only, or to the base cloth plus a nominal coating thickness. In 2023 I had a buyer order 480gsm fabric from a supplier in Jiangsu; the roll weighted 468 to 612gsm across 15 rolls. The buyer had a complaint on 10 of those 15 rolls.

Unpacking the number is not hard if you know how to ask for the right thing.

What is under the coating

Most PVC-coated tarpaulin used for truck curtains, hay covers and industrial flooring is woven from high-tenacity polyester, usually 1000 denier or 500 denier in Europe. The base cloth is the woven fabric: flat woven, serged at the selvedge, and it has its own gram weight per square metre. Common specifications are 200-300gsm for a light cover, 350-450gsm for a truck curtain, and 600gsm or more for industrial flooring or tarpaulin blackouts.

The base cloth is where the strength lives. The direct tension is borne by the polyester yarn, which is what you are checking when you pull a fabric in your hands. If the base cloth is 200gsm, no amount of coating saves a tear at a very sharp corner.

The coating is what is added and what the number mostly hides

PVC coating is applied at a percentage of the base cloth by weight, or per square metre. A "510gsm" fabric may mean a 250gsm cloth plus 260gsm of PVC, or a 300gsm cloth plus 210gsm of PVC. The total is the same; the performance is not.

My rule of thumb: ask for the base cloth weight and the coating weight separately, then check the sum against a real roll weight. Coating to cloth ratio for a truck curtain usually falls between 0.6:1 and 1.2:1. If the supplier gives you a total but cannot break it down, the number is probably marketing.

Then there is the finish. A coating may be lacquered, embossed, annealed or anti-mildew treated, and each of those treatments adds weight. Lacquer on a truck curtain is typically 20-40gsm; an embossed finish adds nothing, but the sample may look heavier because the roll is thicker.

The scale is the least misleading check

The quick factory test is to weigh a 1 square metre sample cut from the roll face, not from the rolled edge. On a fabric with an off-centre coating, the sample from the middle of the roll may differ from the sample at the edge by several percent. Take samples from the two ends of the roll and the middle, and weigh all three.

Then take the fabric weight and check the base cloth thickness. If the fabric is 510gsm and the fabric thickness is 0.35mm, that suggests a heavy cloth and a light coating. If the thickness is 0.55mm, that suggests a lighter cloth and a heavier coating. Both are valid; the question is which one your customer requires.

Write the purchase order around the cloth

  • Base cloth construction: yarn denier, weave, yarns per square centimetre, and cloth gram weight separately.
  • Coating chemistry and additive weight per square metre, plus finish weight if separate.
  • Finished weight tolerance, typically ±5% on a 1 sqm sample.
  • Sample positions and the procedure for verifying both ends of a roll.

Also worth writing in: fire retardancy standard, cold crack at low temperature, and tear strength. None of those are fixed by the weight number, and all three are the first things a buyer complains about when the fabric arrives.

If your sourcing is from a converter rather than a mill, check whether the mill is named. Many coatings suppliers coat cloth they did not weave, and the cloth could be different on the next order.

← More articles  |  Home